Our 12v Network range of thermostats have been designed to work as part of a network system, and can be used in conjunction with the Network Products and PC Link (Windows based) PC connection program. 

Tip !  Using our Heatmiser UH1 central wiring box makes incorporating these thermostat into your home heating system much easier. Simply run a CAT5 FTP cable to each thermostat from the UH1 and the UH1 will deal with 1) power to the stat 2)communications to the TouchPad etc 3) Switching to the valve /Actuator and Boiler and Pump.  Click here to view the UH1 wiring diagram for more information.

Heatmiser DT-N v3 The DT-N is our low voltage digital room thermostat, ideal for conventional or combi-boiler systems. This thermostat does not feature an internal clock and so is normally used with a separate time-clock.    What`s new in v3? Facility to limit use of Up/Down Temp Keys Standard Features 3A volt free switching (Standard) KeyLock Facility Adjustable Frost Temp Setback °C °F Selectable TouchPad, Netmonitor, PCLink Compatible 05-35°C room temperature See the Heatmiser DT-N in our Shop   Manual Download     Heatmiser PRT-N v3 The PRT-N is our low voltage programmable room thermostat. The PRT-N is a digital thermostat and programmer in-one. Providing up to 4 different temperatures at different times of the day.   What`s new in v3? Option to select 5/2 or 7 day program Temperature Hold Facility Holiday Facility Facility to limit use of Up/Down Temp Keys Standard Features 3A volt free switching (Standard) 05-35°C room temperature Optimum Start 5/2 Day Programming KeyLock Facility Adjustable Frost Temp Setback °C °F Selectable TouchPad, Netmonitor, PCLink Compatible Time Sync (When used with TouchPad / PCLink) See the Heatmiser PRT-N in our Shop   Manual Download       Heatmiser PRT-EN v3 The PRT-EN is our low voltage 5/2 day programmable  room thermostat with remote air and floor sensor facility. The PRT-EN is perfect for controlling floor heating systems as a 3 meter remote floor sensor is included.   Alternatively, this model can be used to measure ambient temperature in bathrooms. We would suggest installing the thermostat in an adjacent room and use the remote probe supplied to either measure floor or air temperature (selectable in software) If you wish to measure air temperature, the probe can be installed in our sensor housing.    What`s new in v3? Option to select 5/2 or 7 day program Temperature Hold Facility Holiday Facility Facility to limit use of Up/Down Temp Keys Standard Features 3A volt free switching (Standard) 3 Meter Remote Probe Supplied 05-35°C room temperature Optimum Start 5/2 Day Programming KeyLock Facility Adjustable Frost Temp Setback °C °F Selectable TouchPad, Netmonitor, PCLink Compatible Time Sync (When used with TouchPad / PCLink) See the Heatmiser PRT-EN in our Shop User Manual Download       Heatmiser PRT/HW-N v3 The PRT/HW-N is our low voltage 5/2 day programmable thermostat with an additonal 5/2 day program for a domestic hot water cylinder. Reduced costs and wiring means the PRT/HW-N really is an all-in-one solution.   What`s new in v3? Option to select 5/2 or 7 day program Temperature Hold Facility Holiday Facility Facility to limit use of Up/Down Temp Keys Standard Features 3A volt free switching (Standard) 05-35°C room temperature TouchPad, Netmonitor, PCLink Compatible KeyLock Facility Adjustable Frost Temp Setback 5/2 Day Programming for Heating 5/2 Day Programming for Hot water °C °F Selectable Optimum Start (Energy saving feature) Time Sync (When used with TouchPad / PCLink)   See the Heatmiser PRT/HW-N in our Shop User Manual Download

Home | Products  Contact | Links | Africa  Australia     New Zealand  United Kingdom