|
Click here to view the downloads
available for these products.
Click here to go this category in our online shop. |
The
Heatmiser TR2
From any phone, anywhere, you can ...
- Allows you to adjust the desired temperature in up
to 32 rooms *
- Remotely switch on or off the heating in each room
- Remotely switch the hot water on or off
- Remotely control a single Auxiliary Device ( i.e
Boiler, Lighting, etc)
- Read-back Request Feature
- Pass-code Protection
- Distinctive Ring Facility
(*Heatmiser thermostat required in each room)
"Read-back Request Feature" This feature
allows you to request status information from your TR2. The
status information is read back to you ... for example "The
set temperature is now 22"
From every room with a Heatmiser thermostat fitted, you
can request...
- The set temperature
- The actual room temperature
- The heat status
- The hot water status
- The Auxiliary Device status
Distinctive Ring Facility The TR2 supports
distinctive ring. This is marketed under a variety of names,
but is primarily a function that offers additional telephone
numbers on the same line.
CallSign, from BT for example, provides you with an
additional telephone number on the same line. This number
has a different ring pattern from your normal number and
this pattern can be detected by the TR2 meaning that you can
have an answering machine* on the same line as the TR2.
*Note: Your other telephone equipment
must also support Distinctive Ring. If they don’t, you can
purchase a BT product “BT TwinTalk” which will provide this
function.
Compatibility
The Heatmiser TR2 is
compatible with the 2nd Generation Heatmiser DT-N,
PRT-N, PRT-EN, PRTHW-N
(2nd Generation
Thermostats can be identified by the buttons being in a
straight line)
features a colour
touch screen, giving
central control of
up to 32 low voltage
thermostats.
|
