We have 2 models available in our slimline range.
Non Programmable Model - The Heatmiser DT-E does not have a clock, so a seperate time clock will be required.
Programmable Thermostat - Heatmiser PRT-E includes a time clock which allows you to program different comfort levels for each day of the week.
We have 2 models available in our TouchScreen range.
Non Programmable Model - The Heatmiser DT-ETS does not have a clock, so a seperate time clock will be required.
Programmable Thermostat - Heatmiser PRT-ETS includes a time clock which allows you to program different comfort levels for each day of the week.
The DS1-E is our manual dial thermostat with LED Indication. It doesn't have an integral time clock, so a seperate one will be required.
The DS1-E can switch up to a maximum of 13A - For loads greater than this, a contactor should be used.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Surface
- LED Indication
- Built in Air Sensor
- Remote Floor Sensor
- Floor Sensor Included
- Adjustable Switching Differential
The DS1-EL is our manual dial thermostat with LCD Indication. It doesn't have an integral time clock, so a seperate one will be required.
The DS1-EL can switch up to a maximum of 13A - For loads greater than this, a contactor should be used.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Surface
- Dial Lock Facilty
- LCD Indication
- Built in Air Sensor
- Remote Floor Sensor
- Floor Sensor Included
- Adjustable Switching Differential
The DT-E is our slimline non programmable thermostat. It doesn't have an integral time clock, so a seperate one will be required.
The DT-E can switch up to a maximum of 13A - For loads greater than this, a contactor should be used.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Flush
- Digital LCD
- Keypad Lock
- Built in Air Sensor
- Remote Floor Sensor
- Floor Sensor Included
- Adjustable Switching Differential
The PRT-E is our slimline programmable thermostat. It includes a time clock, so you can program different comfort levels for each day of the week.
The PRT-E can switch up to a maximum of 13A - For loads greater than this, a contactor should be used.
Features include;
- 5/2 Day or 7 Day Programmable
- Holiday and Hold Facility
- Temperature Range - 05-35C
- Mounting Type - Flush
- Digital LCD
- Keypad Lock
- Built in Air Sensor
- Remote Floor Sensor
- Floor Sensor Included
- Adjustable Switching Differential
The DT-ETS is our TouchScreen non programmable thermostat. It doesn't have an integral time clock, so a seperate one will be required.
The DT-ETS can switch up to a maximum of 13A - For loads greater than this, a contactor should be used.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Flush
- Digital LCD
- Keypad Lock
- Built in Air Sensor
- Remote Floor Sensor
- Floor Sensor Included
- Adjustable Switching Differential
The PRT-ETS is our slimline programmable thermostat. It includes a time clock, so you can program different comfort levels for each day of the week.
The PRT-ETS can switch up to a maximum of 13A - For loads greater than this, a contactor should be used.
Features include;
- 5/2 Day or 7 Day Programmable
- Holiday and Hold Facility
- Temperature Range - 05-35C
- Mounting Type - Flush
- Digital LCD
- Keypad Lock
- Built in Air Sensor
- Remote Floor Sensor
- Floor Sensor Included
- Adjustable Switching Differential
We have 3 models available in our manual dial range.
Dial Thermostat with LED - The Heatmiser DS1 does not have a clock, so a seperate time clock will be required. It has LEDs to display the power and heat on status.
Dial Thermostat with LCD - The Heatmiser DS1-L does not have a clock, so a seperate time clock will be required. It has an LCD which displays the heat status as well as the actual and set temperature. It also offers a dial lock facility.
Dial Thermostat with Set Back Function - The Heatmiser DS-SB does not have a clock, so a separate time clock will be required. It offers a set back function, a function that will set back the set temperature by 4C when the time clock is timed to be off.
Upgrading your thermostat to a programmable model is easy and will save you money. What's more, you don't need to remove your time clock. Simply place the heating channel on your existing time clock into Constant Mode and let the programmable thermostat take care of the different comfort levels. The hot water timings will continue to be programmed from your existing time clock.
We have 2 models available in our programmable model range.
Slimline "Button" Programmable Model - The Heatmiser PRT has a built in time clock and so allows you to program different 4 comfort levels for each day of the week.
TouchScreen Programmble Model - The Heatmiser PRT-TS has a built in time clock and so allows you to program different 4 comfort levels for each day of the week. The TouchScreen interface makes programming a doddle!
The DS1 is our manual dial thermostat with LED Indication. It doesn't have an integral time clock, so a seperate one will be required.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Surface
- LED Indication
- Built in Air Sensor
- Adjustable Switching Differential
The DS1-L is our manual dial thermostat with LCD Indication. It doesn't have an integral time clock, so a seperate one will be required.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Surface
- Dial Lock Facilty
- LCD Indication
- Built in Air Sensor
- Adjustable Switching Differential
The DS-SB is our manual dial thermostat with LED Indication. It doesn't have an integral time clock, so a seperate one will be required.
It includes a setback function, which means the thermostat will automatically reduce the set temperature by 4C when the time clock is timed to be off. (Note additonal cabling is required to make use of this function)
Features include;
- Temperature Range - 05-35C
- Mounting Type - Flush
- Set Back Function
- On/Off/Time Clock Function
- LED Indication
- Built in Air Sensor
I am sorry but unless you upgrade your thermostat wiring, we don't have a thermostat suitable for your system.
All of our thermostats require mains power (Live and Neutral 230v) However, you only have a live wire and a switch wire.
You should contact an electrician and ask them to upgrade your thermostat for you. If you would like more assistance, please feel free to call our technical support line on 01254 870303
You should check your existing thermostat wiring before continuing.
The PRT is our slimline programmable room thermostat. It will allow you to replace your existing dial thermostat and be able to control your heating time and temperature settings from your thermostat location.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Flush
- 5/2 Day or 7 Day Programming
- Digital LCD
- Temperature Hold Function
- Holiday Feature
- Built in Air Sensor
- Adjustable Switching Differential
The PRT-TS is our TouchScreen programmable room thermostat. It will allow you to replace your existing dial thermostat and be able to control your heating time and temperature settings from your thermostat location.
Features include;
- Temperature Range - 05-35C
- Mounting Type - Flush
- TouchScreen
- 5/2 Day or 7 Day Programming
- Digital LCD
- Temperature Hold Function
- Holiday Feature
- Built in Air Sensor
- Adjustable Switching Differential
In that case, you should consider upgrading your thermostat to a programmable model but keep the existing time clock to take care of the hot water program.
We have two combination models available
Slimline "Button" Combination Model: Our PRT/HW is provides time and temperature control of a heating zone and timed control of the hot water.
TouchScreen Combination Model: Our PRT/HW-TS is our TouchScreen model that provides time and temperature control of a heating zone and timed control of the hot water.
Our TM1 is a single zone time clock. It provides 4 switching times per day, 7 days of the week.
- Mode 1 is Countdown Timer
- Mode 2 is 5/2 Day Time Clock
- Mode 3 is 7 Day Time Clock
Countdown Timer: In this mode, the user can select the number of hours required by using the Up/Down key. At the end of this time, the output is disabled. The installer can program a maximum countdown time to restrict excess use..
5/2 Day Time Clock: In this mode, the user can program 4 switching times for the week and 4 different switching times for the weekend.
7 Day Time Clock: In this mode, the user can program 4 switching times for each day of the week.
Standard Features:
Back-light LCD
Timer Off override
Volt free Changeover Output, Max 3A
230v Powered
You have reached the end of the wizard.
Please click finish to see a summary.
We have 2 models in our TouchScreen series.
These are;
Heatmiser TM1-TS
This is our 230v Touchscreen Timeclock with three operating modes.
- Mode 1 is Countdown Timer
- Mode 2 is 5/2 Day Time Clock
- Mode 3 is 7 Day Time Clock
The following features are available;
- Blue back-lit Touchscreen
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Key Locking Facility
- Supply: 230v
- Outputs: Volt free 3A Max
- Dimensions: 110x100x17mm
Our TM1 is available in our online store here
Heatmiser TM4
Our TM4 is a 4 Zone Programmer, designed to work with our UH3 wiring centre, but could equally be used to replace standard programmers. Programmers are often difficult to understand, made worse by the fact that they are used infrequently. The TM4 touch screen interface makes operation a doddle.
- 4 Zones
- Each zone can be setup to work in 5/2 Day or 7 Day Programmable Mode
- 4 Switching times per day per zone
- Holiday Facility
- Boost Facility
- Copy Facility
- Mode select (Auto, Constant, Off)
The Heatmiser PRT/HW is our 230v 5/2 day programmable thermostat with an additional 5/2 day program for a domestic hot water cylinder. Reduced costs and wiring means the PRT/HW really is an all-in-one solution.
The following features are available;
- Optimum Start
- °C / °F Selectable
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- 30 minute timing increments
- 5/2 day Heating Program
- 5/2 day Hot water Program
- Up to 4 changes in room temperature
- Key Locking Facility
- Adjustable Frost Protection (7-12°C)
- Easily increase or decrease the required temperature
- Remote control optional
Our PRT/HW is available in our online store here
The following features are available;
- Blue back-lit Touchscreen
- Heating: Weekday/Weekend or 7 Day Programming (Selectable in Software)
- Hot Water: Weekday/Weekend or 7 Day Programming (Selectable in Software)
- Holiday Function
- Hold Function
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Easily increase or decrease the required temperature
- Supply: 230v
- Outputs: Volt free 3A Max
- Dimensions: 110x100x17mm The Heatmiser PRT/HW-TS is our 230v Touchscreen, programmable room thermostat with an additional output for a hot water cylinder.
The following features are available;
- Blue back-lit Touchscreen
- Heating: Weekday/Weekend or 7 Day Programming (Selectable in Software)
- Hot Water: Weekday/Weekend or 7 Day Programming (Selectable in Software)
- Holiday Function
- Hold Function
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Easily increase or decrease the required temperature
- Supply: 230v
- Outputs: Volt free 3A Max
- Dimensions: 110x100x17mm
Central or Remote Control
Step one - Selecting the Wiring Centre
Step two - Selecting the thermostats
We suggest the DS-SB
Our DS-SB Set Back Thermostat is ideal for those wanting a simple but energy efficient control system. The DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected*
Functions include;
- Slide switch mode select (Constant, Off, Time Clock)
- 05-35C Temperature Range
- 4C Set Back Function
- 230v, 3A Switch Rating
- CE Approved
* 4 core cabling is required from time clock in order to use the set back function
We suggest the UH3 Wiring Centre
A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler.Up to 4 actuators can be connected to each zone.
- 4 Zones
- Each zone can be setup to work in 5/2 Day or 7 Day Programmable Mode
- 4 Switching times per day per zone
- Holiday Facility
- Boost Facility
- Copy Facility
- Mode select (Auto, Constant, Off)
Click Finish to see the summary of the suggested system.
We suggest the Heatmiser PRT or PRT-TS
The Heatmiser PRT-TS offers the same functionality as the PRT but is a TouchScreen version
Controlling bathrooms...
For bathrooms we have two suggestions;
The Heatmiser PRT-E is a single zone thermostat. It is supplied with a remote sensor, and it is recommended that the thermostat is installed in a corridor or adjacent bedroom and the remote sensor is placed in the bathroom to control either the air or floor temperature.
The Heatmiser PRT2-TS is a TouchScreen model specifically designed for two zones. This means a single thermostat can control the bedroom and the bathroom invidually. A remote sensor is included for use within the bathroom.
We suggest the Heatmiser PRT/HW or PRT/HW-TS
The Heatmiser PRT/HW is our 230v 5/2 day programmable thermostat with an additional 5/2 day program for a domestic hot water cylinder. Reduced costs and wiring means the PRT/HW really is an all-in-one solution.
The Heatmiser PRT/HW-TS offers the same functionality as the PRT-TS but is a TouchScreen version
Hot water?
We suggest the UH1 Wiring Centre
The Heatmiser UH1 is our central wiring switch box designed to be used with our 12v network thermostats. The UH1 offers the following functionality;
- Central wiring to up to 8 zone actuators
- Output for under-floor heating valve and pump activated when any thermostat calls for heat
- Works with our low voltage thermostats.
- Output for a single radiator zone
- Output for domestic hot water
- Low voltage wiring to thermostats.
- Network connection to Touchpad, Netmonitor, TR2, PCLink
- Actuator outputs: 240V
We suggest the Heatmiser PRT-N or PRT-NTS
The Heatmiser PRT-NTS offers the same functionality as the PRT-N but is a TouchScreen version
We suggest the Heatmiser PRT/HW-N or PRT/HW-NTS
The Heatmiser PRT/HW-N is our Network 5/2 day programmable thermostat with an additional 5/2 day program for a domestic hot water cylinder. Reduced costs and wiring means the PRT/HW-N really is an all-in-one solution.
The Heatmiser PRT/HW-NTS offers the same functionality as the PRT/HW-N but is a TouchScreen version
Tip! Our heating and hot water models connect to port 1 on the UH1.
Controlling bathrooms...
For bathrooms we have two suggestions;
The Heatmiser PRT-EN is a single zone network thermostat. It is supplied with a remote sensor, and it is recommended that the thermostat is installed in a corridor or adjacent bedroom and the remote sensor is placed in the bathroom to control either the air or floor temperature.
The Heatmiser PRT2-NTS is a Network TouchScreen model specifically designed for two zones. This means a single thermostat can control the bedroom and the bathroom invidually. A remote sensor is included for use within the bathroom.
Central control..
We suggest the Heatmiser TouchPad
The Heatmiser TouchPad features a colour touch screen, giving you central control of up to 32 zones of heating. There really is no better way to take control of your heating.
You are able to give each thermostat a name allowing you to easily identify each thermostat on the network.
Remotely program the comfort levels of all network thermostats from one central point and copy program settings from one thermostat to another across the network.
| Display: | Colour Touch Screen (58 x 77 mm) |
| Max Zones: | 32 zones |
| Title: | Give each zone a unique name |
| Home / Away Function | Switch your system into setback mode or normal "Home" mode at the touch of a button |
| Temperature Hold | Use this function to hold a desired temperature for a fixed period. Ideal for unexpected activities. |
| Holiday | Use the holiday function to put the heating in to frost mode whilst you are away. |
| Hw boost facility | Use the HW boost to quickly override the hot water timed settings |
| Quick View | See at a glance the current thermostat status throughout your building |
| Time sync | Synchronises all of the thermostat clocks on the network |
| Auto GMT | Automatically corrects the time for Summer / Winter time |
| History | View the Hours Run for the past 4 weeks or the temperature graph for the previous 24 hours |
| Master Time-clock | Select which thermostats you want to work from the built in time-clock |
| Key Lock | Lock each thermostat to prevent unauthorised tampering of the thermostat setting |
| Password Protect | When enabled, the user must enter a pass code in order to program the network thermostats |
| Temperature Format | Choose between C / F mode |
| Frost Setting | Program the frost temperature for each thermostat |
| Floor limit | Program the floor limit for under-floor heating models |
| Compatible with models | Heatmiser Network Thermostats |
We suggest the Heatmiser Netmonitor
Features
- Allows you to program the desired comfort levels for each room in your house from any internet browser worldwide (Max 32 Rooms)
- Connect up to 6 of our Industrial Sensors for monitoring and alarm purposes
- Program low and high temperature limits and receive notification on email
- Connect up to 6 volt free alarms such as your home alarm and receive alarm indications on email
- Control up to 6 appliances remotely via web browser.
What`s new in v3 ?
- Home/Away Function - Clicking the Away button will now place every room into setback mode and will turn the hot-water off. On your return, you can press Home and the system will revert back to the programmed settings. This function is also compatible with the Touchpad - so you can place the system in Home or Away mode from either device.
- Groups - You can now create up to 5 groups. Once created, you can add rooms to those groups. For example, you could create a group called "Bedrooms" and then add every bedroom to that group. Groups are used during programming, and greatly help to reduce the programming time.
- Live View Frame - To the right of the Netmonitor window is a Live View providing a quick method of viewing the status of any room in your home.
- Temperature Hold - You can now program to hold a required temperature for a certain period. You can then apply this to individual rooms or a group
- Keylock - You can now lock or unlock individual or a group of rooms.
- Easier Setup Procedure - We have simplified the procedure of adding and naming thermostats.
We suggest the Heatmiser Netmonitor +
Features
- Allows you to program the desired comfort levels for each room in your house from any internet browser worldwide (Max 32 Rooms)
- Control your heating and hot water by text message
- Connect up to 6 of our Industrial Sensors for monitoring and alarm purposes
- Program low and high temperature limits and receive notification on email
- Connect up to 6 volt free alarms such as your home alarm and receive alarm indications on email
- Control up to 6 appliances remotely via web browser.
What`s new in v3 ?
- Home/Away Function - Clicking the Away button will now place every room into setback mode and will turn the hot-water off. On your return, you can press Home and the system will revert back to the programmed settings. This function is also compatible with the Touchpad - so you can place the system in Home or Away mode from either device.
- Groups - You can now create up to 5 groups. Once created, you can add rooms to those groups. For example, you could create a group called "Bedrooms" and then add every bedroom to that group. Groups are used during programming, and greatly help to reduce the programming time.
- Live View Frame - To the right of the Netmonitor window is a Live View providing a quick method of viewing the status of any room in your home.
- Temperature Hold - You can now program to hold a required temperature for a certain period. You can then apply this to individual rooms or a group
- Keylock - You can now lock or unlock individual or a group of rooms.
- Easier Setup Procedure - We have simplified the procedure of adding and naming thermostats.
We suggest the Heatmiser TR2
From any phone, anywhere, you can ...
- Allows you to adjust the desired temperature in up to 32 rooms *
- Remotely switch on or off the heating in each room
- Remotely switch the hot water on or off
- Remotely control a single Auxiliary Device ( i.e Boiler, Lighting, etc)
- Read-back Request Feature
- Pass-code Protection
- Distinctive Ring Facility
(*Heatmiser thermostat required in each room)
"Read-back Request Feature" This feature allows you to request status information from your TR2. The status information is read back to you ... for example "The set temperature is now 22"
From every room with a Heatmiser thermostat fitted, you can request...
- The set temperature
- The actual room temperature
- The heat status
- The hot water status
- The Auxiliary Device status
We suggest Heatmiser PCLink
Features include;
History facility
The history feature allows you to record the operating status of each thermostat connected to the PC. A recording interval can be set.
Holiday facility
PCLink Lite allows you to program holiday periods. During this time, PCLink Lite will switch all thermostats in to frost mode. PCLink will automatically switch the thermostats back in to their normal mode at the end of the holiday period. PCLink must be running for this function to operate.
Quick Temperature Adjust
The quick temperature adjust facility allows you to easily set the same temperature on many thermostats. This is a temporary temperature which will be maintained until the next programmed comfort level in the thermostat.
Alarm information
PCLink Lite can be programmed to indicate an alarm should the temperature drop below a set limit.
Program comfort levels
PCLink Lite allows you to quickly program the comfort levels for each thermostat connected to the PC.
Program hot water timings
PCLink Lite can be used to program the hot water timings on the PRT/HW-N
System Temperature Limits
Limits can be programmed in the PCLink program. This then restricts users from entering temperature set points higher or lower than the limits programmed.
Keylock function
From PCLink Lite you can enable or disable the keylock function on each thermostat. Keylock makes the thermostat tamperproof.
Passcode protected
To prevent unauthorised use of the PCLink program, a passcode is required.
Frost protection
You are able to put individually thermostats in to frost mode. In addition, you can also program the frost temperature.
Connetion Methods;
USB - Connect up to 32 thermostats to your USB port by using the USB adaptor. This is the best method for those wanting a direct connection to a single PC.
Ethernet - This adaptor allows you to connect up to 32 thermostats and control them either locally on your home network or remotely over the internet. The PC being used will need PCLink installed.
Types of remote access...
We suggest the Jara 2201D Adaptor
We suggest the NC601 Ethernet Adaptor.
Hot water?